Although the brow protector is missing, there are holes for the rivets both at the sides and on the front of the helmet bowl. Corrosion traces show where the brow band was fitted.
The hollow plume holder was cast and soldered to the helmet bowl crown.
At the rear of the helmet neck guard and beneath it there is a ring, attached with a bronze rivet. This was used to attach the securing laces of the helmet.
Schalles, H.J., (1993) in Schreiter, Ch. (Ed.), "Geschichte aus dem Kies. Neue Funde aus dem alten Rhein bei Xanten", Xantener Berichte, 3, Mil 4 Infanteriehelm, Abb. 97-99, Taf. 22
;)
;)
;)